are intended for catching of fine particles from dust air mixture in dust-exhaust systems of grinding plants; dust from dryers and from air of pneumatic transport systems.
Advantage of the cyclone-bunker in comparison with a cyclone of type CN-15 of the same standard size is higher productivity and efficiency of dust separation, smaller high-altitude dimensions and simplicity of operation and bigger volume of a bunker part.
The cyclone-bunker is recommended to be used as the first step of product separation in pnevmotransport systems and grinding plants.
Cyclone-bunkers are not recommended to use for coherent, explosive and fibrous dust.
Technical specifications
Table 1
|
Parameters |
Value |
|
| CB-3,5 | CB-4,5 | |
| Admissible dust content of gases, g/m3 | not more 1000 | |
| Temperature of cleared gas, °С |
not more 400 |
|
| Operating speed, m/s |
up to 30* |
|
| Purification efficiency, % |
up to 96* |
|
| Air capacity, m3/h |
3500 |
4500 |
| Working capacity of bunker part, m3 |
0,75 |
1,15 |
| Weight, kg |
321 |
366 |
Working speed and efficiency of product selection depend on granulometric size composition and
weights of caught particles.
Overall and connection dimensions
Table 2
|
Parameters |
Value, mm | |
| CB-3,5 | CB-4,5 | |
| Height, H |
2310 |
2755 |
| Length, L |
1600 |
1750 |
| Width, B |
1600 |
1750 |
| Body diameter, D |
500 |
560 |
| Bunker diameter, D1 |
1500 |
1650 |
| Height to supporting flange, h1 |
1310 |
1365 |
| Inlet fitting dimensions, a´b | 330´100 | 360´110 |
| Diameter of outlet hole, d1 |
300 |
335 |
| Diameter of discharge hole, d2 |
200 |
200 |
Загрузка ...